SOUTHWESTERN INDUSTRIES TRAK DPM RX7 featuring the ProtoTRAK RMX CNC

ProtoTRAK CNC Model RMX
Table Size 76″ x 14″
T-Slots (Number x Width) 4 x .63″ x 2.5″
Travel (X, Y, Z Axis)* 60″ x 23.5″ x 23″
Quill Diameter 4.56″
Maximum Quill Travel 5.5″
Spindle Taper 40 Taper
Spindle Speed Range RPM 40 - 600, 300 - 5000
Spindle Center to Column Face 24″
Head Swivel (side to side) +30° CW and -90° CCW Note
Quill Feeds per Revolution of Spindle 0.0015/0.003/0.006″
Spindle Motor HP 7.5 HP
Power Requirements 200-240V, 3P, 42A
Maximum Weight of Workpiece 2200 lbs
Height Of Table From Bottom Of Bed 38.75″
Max Spindle Nose To Table 24.25″
Min Height 87.875″
Max Height 105″
Width Of Machine Including Table 110″
Overall Length With Electric Door Closed 94.5″
Overall Length With Electrical Door Open 119″
Overall Width Inc Full Table Traverse 168.5″
Footprint Of Machine 42.52″ x 63″
Weight Net / Shipping Lbs. 7480 / 7700
Rapid Traverse X, Y, Z 400 IPM on X and Y, 250 IPM on Z
Coolant Reservoir Capacity 15 gallons
Drilling Max Capacity (diameter) 1″ dia.
Milling Max Capacity 7 inch³/min
Tapping Max Capacity 1 - 8

* DPM RX2 and RX3 - If you remove the way covers you can gain approximately 2″ of additional travel at the top. Values in the specifications table are with the way covers installed.
** Head swivel is limited to approximately 30° in the clockwise direction due to the pendant arm extension bracket.