New KENT USA KTM-3S | Manual Knee Mills
ConditionNew
New
Manual Knee Mills are affordable, easy to operate, and ideal/perfect for prototype, tool room and R&D work, as well as part of training programs and everyday machining. For maximum versatility, choose a Kent Manual Knee Mill. You will be able to perform practically any milling operation on a knee mill, including angled cuts and drilling and the cutting and drilling of long work pieces. They are also great for fixtures, rework, and one-of-a-kind components.
Features
- 3 HP spindle motor, 16 speeds step pulley milling head
- 9” x 42” hardened and ground table
- Table, saddle, and knee with hardened and ground dovetail ways
- Precision ground leadscrews with backlash compensating double nut
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite® casting, with built in coolant reservoir in machine base
- Centralized one-shot lubrication, with metered check-valves
STANDARD FEATURES
3 HP spindle motor, 16 speeds step pulley milling head
9” x 42” hardened and ground table
Table, saddle, and knee with hardened and ground dovetail ways
Precision ground leadscrews with backlash compensating double nut
Precision bored and ground milling head, with super precision ABEC-7 bearings
Meehanite® casting, with built in coolant reservoir in machine base
Centralized one-shot lubrication, with metered check-valves
OPTIONS
Digital Readout System (View Brochure)
Table (X-Axis) Power Feed
Saddele (Y-Axis) Power Feed
Knee (Z-Axis) Power Feed
Air Power Drawbar
Flood Coolant System
Chip Tray
Right Angle Milling Attachment w/ Arbor Support
Rustlick Coolant (1 Gal., Mixes 1:30)
Riser Blocks (4″/6″/8″)
Angle-lock Vises (6″/8″)
Rotary Table
Clamping Kit (52pc)
R-8 Collet Set
Single Phase Motor Option
NMTB-30 Spindle
Manual Knee Mills are affordable, easy to operate, and ideal/perfect for prototype, tool room and R&D work, as well as part of training programs and everyday machining. For maximum versatility, choose a Kent Manual Knee Mill. You will be able to perform practically any milling operation on a knee mill, including angled cuts and drilling and the cutting and drilling of long work pieces. They are also great for fixtures, rework, and one-of-a-kind components.
Features
- 3 HP spindle motor, 16 speeds step pulley milling head
- 9” x 42” hardened and ground table
- Table, saddle, and knee with hardened and ground dovetail ways
- Precision ground leadscrews with backlash compensating double nut
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite® casting, with built in coolant reservoir in machine base
- Centralized one-shot lubrication, with metered check-valves
Imperial
| Table-W | 9" |
| Table-L | 42" |
| Travel-Long | 28" |
| Travel-Cross | 12" |
| Power | 3 hp |
| RPM | 0 RPM |
| Taper | R-8 |
| Weight | 2300 (LBS) |
STANDARD FEATURES
3 HP spindle motor, 16 speeds step pulley milling head
9” x 42” hardened and ground table
Table, saddle, and knee with hardened and ground dovetail ways
Precision ground leadscrews with backlash compensating double nut
Precision bored and ground milling head, with super precision ABEC-7 bearings
Meehanite® casting, with built in coolant reservoir in machine base
Centralized one-shot lubrication, with metered check-valves
OPTIONS
Digital Readout System (View Brochure)
Table (X-Axis) Power Feed
Saddele (Y-Axis) Power Feed
Knee (Z-Axis) Power Feed
Air Power Drawbar
Flood Coolant System
Chip Tray
Right Angle Milling Attachment w/ Arbor Support
Rustlick Coolant (1 Gal., Mixes 1:30)
Riser Blocks (4″/6″/8″)
Angle-lock Vises (6″/8″)
Rotary Table
Clamping Kit (52pc)
R-8 Collet Set
Single Phase Motor Option
NMTB-30 Spindle
We use cookies to improve your experience. Privacy Policy.