New KENT USA CH-30120 | Precision Manual Lathes
ConditionNew
New
Kent USA precision lathes are designed for turning medium to heavy workpieces with tighter tolerances. These reliable workhorses feature heavy-duty construction throughout to cut big and heavy workpieces. Our precision lathes are built with a solid full-length casting base. In addition, front-loading chip tray for easier cleaning, adjustable overload feed clutches, and quick reversal feed from apron – all of which come standard.
Dependable and powerful, these highly accurate manual lathes are built for powerful machining and minimal downtime. Kent USA Precision Series Lathes are offered with 11” x 18” to 44” x 320” work capacities, 1.56″ to 12″ spindle bores, and up to 20 HP of spindle motors.
• 15 HP Spindle Motor, 12-Speeds
• 4.1” (104mm)Spindle Through Hole
• Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
• Spindle Jog Button Control
• One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
• Dual Inch/Metric Calibrated Tailstock
• Dual Inch/Metric Dials
• 3-jaw chuck(16”, made in Taiwan)
• Steady rest(10”, roller)
• Follow rest(40-184mm)
• Thread chasing dial
• 4 position tool post
• Coolant system with full-length splash guard
• 4 position carriage stop
• 2 speed tailstock
• Z-axis Rapid travel
• Dead center x 2 pcs
• LED worklight
Kent USA precision lathes are designed for turning medium to heavy workpieces with tighter tolerances. These reliable workhorses feature heavy-duty construction throughout to cut big and heavy workpieces. Our precision lathes are built with a solid full-length casting base. In addition, front-loading chip tray for easier cleaning, adjustable overload feed clutches, and quick reversal feed from apron – all of which come standard.
Dependable and powerful, these highly accurate manual lathes are built for powerful machining and minimal downtime. Kent USA Precision Series Lathes are offered with 11” x 18” to 44” x 320” work capacities, 1.56″ to 12″ spindle bores, and up to 20 HP of spindle motors.
Imperial
| Swing | 30" |
| Centers | 120" |
| Threading | 44, 2 - 72 TPI |
| Taper | MT#7 |
| Power | 15 hp |
| RPM | 1,200 RPM |
| Dimensions | 227 x 45 x 76 |
| Weight | 9526 |
• 15 HP Spindle Motor, 12-Speeds
• 4.1” (104mm)Spindle Through Hole
• Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
• Spindle Jog Button Control
• One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
• Dual Inch/Metric Calibrated Tailstock
• Dual Inch/Metric Dials
• 3-jaw chuck(16”, made in Taiwan)
• Steady rest(10”, roller)
• Follow rest(40-184mm)
• Thread chasing dial
• 4 position tool post
• Coolant system with full-length splash guard
• 4 position carriage stop
• 2 speed tailstock
• Z-axis Rapid travel
• Dead center x 2 pcs
• LED worklight
We use cookies to improve your experience. Privacy Policy.