KENT USA CH-26160
ConditionNew
New
Kent USA precision lathes are designed for turning medium to heavy workpieces with tighter tolerances. These reliable workhorses feature heavy-duty construction throughout to cut big and heavy workpieces. Our precision lathes are built with a solid full-length casting base. In addition, front-loading chip tray for easier cleaning, adjustable overload feed clutches, and quick reversal feed from apron – all of which come standard.
Dependable and powerful, these highly accurate manual lathes are built for powerful machining and minimal downtime. Kent USA Precision Series Lathes are offered with 11” x 18” to 44” x 320” work capacities, 1.56″ to 12″ spindle bores, and up to 20 HP of spindle motors.
Standard Accessories
3-jaw chuck (16”, made in Taiwan)
Steady rest(10”, roller)
Follow rest(40-184mm)
Thread chasing dial
4 position tool post
Coolant system with a full-length splash guard
4 position carriage stop
2-speed tailstock
Z-axis Rapid travel
Dead center x 2 pcs
15 HP Spindle Motor, 12-Speeds
4.1” (104mm)Spindle Through Hole
Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
Spindle Jog Button Control
One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
Dual Inch/Metric Calibrated Tailstock
Dual Inch/Metric Dials
Kent USA precision lathes are designed for turning medium to heavy workpieces with tighter tolerances. These reliable workhorses feature heavy-duty construction throughout to cut big and heavy workpieces. Our precision lathes are built with a solid full-length casting base. In addition, front-loading chip tray for easier cleaning, adjustable overload feed clutches, and quick reversal feed from apron – all of which come standard.
Dependable and powerful, these highly accurate manual lathes are built for powerful machining and minimal downtime. Kent USA Precision Series Lathes are offered with 11” x 18” to 44” x 320” work capacities, 1.56″ to 12″ spindle bores, and up to 20 HP of spindle motors.
Imperial
| Swing | 26" |
| Centers | 90" |
| Threading | 44 (2-72) TPI |
| Taper | MT#7 |
| Power | 15 hp |
| RPM | 1,200 RPM |
| Dimensions | 187” x 45” x 76” |
| Weight | 8195 pounds |
Standard Accessories
3-jaw chuck (16”, made in Taiwan)
Steady rest(10”, roller)
Follow rest(40-184mm)
Thread chasing dial
4 position tool post
Coolant system with a full-length splash guard
4 position carriage stop
2-speed tailstock
Z-axis Rapid travel
Dead center x 2 pcs
15 HP Spindle Motor, 12-Speeds
4.1” (104mm)Spindle Through Hole
Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
Spindle Jog Button Control
One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
Dual Inch/Metric Calibrated Tailstock
Dual Inch/Metric Dials
We use cookies to improve your experience. Privacy Policy.